Kirisun Radio Programming Software Portable Jun 2026
: Often used for modern digital models like the DP4 series (specifically for firmware V5.x.x.x).
These legacy models require basic analog CPS versions that focus strictly on frequency mapping and standard squelch settings.
Check that the cable is firmly seated, the radio is on, and the correct COM port is selected in the software.
Adjusting transmit power (High/Low) to balance range and battery life. kirisun radio programming software
Digital models utilize advanced CPS packages capable of handling digital contact lists, encryption keys, and dual-slot direct mode operations.
Using the wrong software will prevent the radio from connecting. Below is a quick reference table for some common Kirisun models and their corresponding programming software.
: Enter your Receive (RX) and Transmit (TX) frequencies. : Often used for modern digital models like
Finding and installing the correct software is the first major step.
Use templates to clone settings across multiple radios, ensuring consistency across your entire team.
Verify that the radio is switched on and the battery is fully charged. Double-check that your software COM port setting matches the Windows Device Manager port. Ensure the cable is firmly seated into the radio housing. Adjusting transmit power (High/Low) to balance range and
Displays the radio’s serial number, firmware version, and factory frequency range.
Verify the COM port in Setup matches the Device Manager port.
Programming Kirisun radios requires specific software and hardware tailored to your model. Follow this guide to set up your system and program your devices effectively. 🛠️ Preparation Checklist
Set up CTCSS, DCS, MDC1200, and 5-Tone signaling to eliminate unwanted interference.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.