Early adopter?
Video conversion is coming soon.
Register to be the first to know when it's released!
You have been added to the waitlist!
Which (Smartpack 1, Smartpack2, or Smartpack S) are you targeting?
PowerSuite uses a pin-code system for access control:
Choose the appropriate COM port or enter the exact IP address of the target controller. Click to initialize the live data sync. How to Safely Obtain PowerSuite 3.2
: If you lack the physical media, contact your local Eltek representative or visit the Delta Electronics Download Center for official access.
Click and enter your system credentials (default factory credentials can be found in your specific Eltek hardware manual). Troubleshooting Common Issues Connection Timeout Error eltek powersuite 3.2 download
The software you are looking for is , an official PC application designed to program, configure, and monitor Eltek's range of DC power supply systems. It is used to communicate with Eltek's controller modules, primarily from the Smartpack and Compack families, providing access to system settings, alarms, and real-time data.
: Identify hardware versions and serial numbers of connected modules. How to Download
Run the installer in "Windows XP Compatibility Mode" if installing on Windows 7/10/11. Alternative/Newer Versions
If you encounter issues during download, installation, or usage, refer to: Which (Smartpack 1, Smartpack2, or Smartpack S) are
Save complete system configurations as standard files.
Addresses several reported problems from versions 3.0 and 3.1, enhancing the stability of connections and file saving.
: Run the setup file from your installation media. Follow the InstallShield Wizard instructions and accept the default directory.
Connect a standard from your PC to the controller's USB port. How to Safely Obtain PowerSuite 3
Perform updates on connected modules and controllers.
However, remains the preferred tool for deep-level configuration, troubleshooting, and direct, on-site commissioning. Troubleshooting Download and Installation Issues
If your controller is newer than the software, it might not be recognized. Consider using PowerSuite 3.4 or newer if 3.2 fails to detect the system.
is a vital software application designed for the remote management, configuration, and monitoring of Eltek DC power supply systems. It serves as the primary interface between a technician’s computer and Eltek’s range of advanced controllers, including the Smartpack , Smartpack2 , Smartpack S , and Compack series. Key Features of PowerSuite 3.2
The default path is C:\Program Files (x86)\Eltek\PowerSuite\ . Leave as default unless you have specific storage needs.