Hold the or Volume Up key (this acts as the boot key for MTK devices) and connect the phone to the PC via the USB cable.

A recommendation on how to use the SPD Upgrade Tool .

You should look for the QMobile X32 v2 flash file if your phone is experiencing: The phone gets stuck at the QMobile / Noir logo.

: Recovers dead devices caused by failed updates or experimental software. Factory Reset

If your QMobile X32 v2 does not turn on, gets stuck on the QMobile logo, or keeps restarting (boot loop), flashing the stock firmware is often the only solution.

chipset, the process requires specific drivers and a flashing tool. QMobile Noir X32 Flash Guide Required Files: Flash File:

Open the folder and run UpgradeDownload.exe as Administrator.

If the progress bar does not start moving, your computer cannot communicate with the phone. Reinstall the MediaTek USB drivers, try a different USB port on your PC, or change your USB cable.

Resets forgotten pattern locks, PINs, or passwords.

Flashing erases all internal storage. Back up your photos, contacts, and documents if the phone is still accessible.

Look for an official .pac file specifically for the " QMobile X32 V2

Always verify the following before downloading: