Hys3c210-cs Official
HYS3C210-CS is a specific power supply board (PSU) used in Harman Kardon HKTS 200
Because subwoofers are enclosed boxes with minimal airflow, heat builds up internally. Over years of use, the electrolytic smoothing capacitors on the HYS3C210-CS
The LED illuminates (often amber or red) but fails to switch to an active state (blue or white) when an audio signal is detected.
For advanced builders, you can completely remove the problematic HYS3C210-CS board from the chassis. Replace it by safely routing a standalone 48V industrial power supply combined with a small step-down buck converter (configured to step 48V down to a split +7V/-7V rail system) to handle all aspects of the subwoofer's power architecture.
The HYS3C210-CS is frequently discussed in repair communities due to specific failure patterns: hys3c210-cs
When replacing capacitors, use the same capacitance (e.g., ) but ensure the voltage rating is equal or higher (e.g., 50V50 cap V 63V63 cap V 48V48 cap V
HYS3C210-CS Power Supply Breakdown: Troubleshooting and Replacing Your Harman Kardon Subwoofer Component The HYS3C210-CS
:
The ultra-low 18µA quiescent current makes it ideal for environmental sensors, beacons, and smart agriculture nodes. Running directly from a CR2032 or LiMnO2 battery, the HYS3C210-CS efficiently steps down to 1.8V or 1.2V for low-power MCUs like the ESP32-C3 or Nordic nRF52 series. HYS3C210-CS is a specific power supply board (PSU)
connected solely to handle the +7V/-7V standby and control functions. Sever the dead 48V lines from the old board.
: A 100Ω (1W) resistor that frequently burns out or shows heat damage.
is a common point of failure for these systems. This article explores the technical specifications, common failure symptoms, repair techniques, and replacement options for the HYS3C210-CS Go to product viewer dialog for this item. HYS3C210-CS Go to product viewer dialog for this item. Technical Overview The HYS3C210-CS Go to product viewer dialog for this item.
stems from sustained heat generation within the enclosed, airtight environment of a subwoofer cabinet. Over time, this leads to distinct component failures: Replace it by safely routing a standalone 48V
can be difficult due to discontinued parts production, repair enthusiasts generally take one of three paths: Component-Level Recap
, including its technical function, common failure points, troubleshooting, and repair strategies for the DIY enthusiast. 1. What is the HYS3C210-CS? The HYS3C210-CS Go to product viewer dialog for this item.
is a critical, yet vulnerable, component of the Harman Kardon HKTS 200/210 subwoofer systems. While failures are frustrating, the board is often repairable with basic electronics repair skills, specifically by targeting the TL494 controller and associated capacitors.
is designed to supply multiple voltage rails to the LFMA 00690 amplifier board located within the subwoofer enclosure.
Power supplies work very hard and get very hot. Over time, heat can wear out the tiny electronic pieces on the board. You can find parts listings and repair advice for these boards on sites like eBay. The most common reasons these boards fail include: