Jm105 Service Manual Full [work] -
The internal power system utilizes a specialized rechargeable medical battery pack. Technicians must track these care parameters: User Quick Reference Guide - JM-105 Jaundice Meter
The manual includes a troubleshooting section to help diagnose common issues. This typically covers:
Locate the lithium-ion battery pack and disconnect its multi-pin molex terminal lead from the main circuit logic board.
Always apply physical padlocks and warning tags to the primary energy isolator before servicing.
: The device should be stored in its docking station when not in use to maintain battery life. jm105 service manual full
Check battery charge level. If fully charged, replace the lamp assembly.
According to the Dräger JM-105 Technical Documentation , administrators must set up the instrument under one of three localized data transmission modes:
According to the documentation, authorized service personnel can replace several key components to extend the life of the unit, including: Xenon Lamp Unit Main PCB Controller Sensor PCB Touch Panel Display
Details on the Xenon flash lamp, silicon photodiode sensors, and the internal NiMH battery. Operational Principles: Always apply physical padlocks and warning tags to
Configuring the device accurately prevents data corruption and ensures proper diagnostic alignment with institutional protocols. The device features a touchscreen display, a side power switch, and a dedicated screen lock button.
If the daily check fails repeatedly, authorized technicians must access the internal service menu using specialized software or code sequences detailed by the manufacturer. This involves testing the sensor against standard optical density blocks to reset the baseline measurement algorithms. 4. Troubleshooting and Error Code Matrix
: This acts as the primary interface for inputting patient IDs and viewing history data. It features a blue hardware screen lock button on the outer casing to freeze touch sensitivity during procedures.
Check the structural integrity of the outer polycarbonate casing for impact fractures. If fully charged, replace the lamp assembly
Do you have the available to run a test?
When the JM105 encounters a hardware or software malfunction, it displays specific error codes. Below is a guide to diagnosing these faults. Error Code / Symptom Possible Cause Corrective Action Xenon lamp failure or weak power delivery.
Carefully unplug the battery harness from the main logic board before touching any other components.
Spent flash tube assembly or localized power distribution board failure.
The cash drawer port delivers a 24V pulse to trigger the drawer solenoid. Chassis Ground Pin 2: Drawer Kick-Out Signal (Output) Pin 3: Drawer Open/Closed Status (Input) Pin 4: +24V DC Power Pin 5: N/C (Not Connected) Pin 6: Logic Ground