Are you sure you want to exit?
Selecting this link will take you outside of the RDO Equipment Co. website. Do you wish to continue?
Create a text file named TIMERSET.txt in the root directory of the SD card.
Press and hold the "ON/OFF" button for 2 seconds. The yellow and blue lights should light up together, then flash. Power Off:
From standby mode, press the once to switch to Photo Mode. The indicator light will change color (e.g., from solid blue to solid red). Press the Power/Shoot button once.
: Typically located on the top or side; used to turn the device on/off and switch modes.
Proper preparation prevents recording failures and corrupted files. Follow these steps before your first deployment. Charging the Battery
Now that you've set up the camera, it's time to learn how to operate it. Here's a step-by-step guide:
Format: YYYYMMDDHHMMSS Y (e.g., 20260522153000 Y for May 22, 2026, at 3:30 PM).
Save the text file, safely eject the camera/card from your computer, and power the camera on. The new time settings will take effect instantly. 6. Accessing and Transferring Media Connecting to a Computer
A: Likely the IR cut filter is stuck. Tap the device gently. If persistent, the unit is defective.
Open the file and modify the text to match the current date and time format exactly as shown below:
Insert the memory card with the gold contacts facing toward the lens side (or as indicated by the casing icon). Push until it clicks into place.
Create a text file named TIMERSET.txt in the root directory of the SD card.
Press and hold the "ON/OFF" button for 2 seconds. The yellow and blue lights should light up together, then flash. Power Off:
From standby mode, press the once to switch to Photo Mode. The indicator light will change color (e.g., from solid blue to solid red). Press the Power/Shoot button once. hicam h6 mini dv operating manual
: Typically located on the top or side; used to turn the device on/off and switch modes.
Proper preparation prevents recording failures and corrupted files. Follow these steps before your first deployment. Charging the Battery Create a text file named TIMERSET
Now that you've set up the camera, it's time to learn how to operate it. Here's a step-by-step guide:
Format: YYYYMMDDHHMMSS Y (e.g., 20260522153000 Y for May 22, 2026, at 3:30 PM). Power Off: From standby mode, press the once
Save the text file, safely eject the camera/card from your computer, and power the camera on. The new time settings will take effect instantly. 6. Accessing and Transferring Media Connecting to a Computer
A: Likely the IR cut filter is stuck. Tap the device gently. If persistent, the unit is defective.
Open the file and modify the text to match the current date and time format exactly as shown below:
Insert the memory card with the gold contacts facing toward the lens side (or as indicated by the casing icon). Push until it clicks into place.