Epson L3111 Adjustment Program

After completing these steps, the error message should be cleared, and your Epson L3111 should be ready for normal printing again.

The (often called AdjProg ) is the official, or sometimes third-party, service software used to reset this internal waste ink counter to 0%, allowing you to continue printing without physically replacing the pads immediately. What is the Epson L3111 Adjustment Program?

You will see the counter drop to 0.

Performing nozzle checks, paper feed tests, and ink charging.

Disclaimer: This article is for informational purposes only. The Epson Adjustment Program is not authorised for end‑user use by Epson. Use it at your own risk. The author is not responsible for any damage to your printer or computer caused by following this guide. epson l3111 adjustment program

The Adjustment Program is a specialized service tool designed for technicians and authorized repair centers. It allows users to perform various maintenance tasks beyond the standard driver settings, including:

The adjustment program is available in multiple versions for the Epson L3111. The most commonly encountered version for the European market is , which supports the Epson L1110, L3100, L3101, L3110, L3111 , L3116, L3150, L3151, L3156, and L5190. The program is Windows-only, but can be run in compatibility mode for newer versions.

Summary

The program will display a message stating, "Please turn off the printer." Turn off your printer using its physical power button. Click OK on the computer screen. After completing these steps, the error message should

Download and extract the Epson L3111 Adjustment Program zip file to your desktop using WinRAR or 7-Zip.

The adjustment program is a powerful but delicate tool; incorrect use can harm your printer. Follow these guidelines to ensure a safe and successful reset.

Before proceeding, you must understand the hardware reality.

It is strongly recommended. The adjustment program resets the counter, not the physical pad's capacity. If you only reset the software, the physical pads remain saturated and may eventually leak. Using an external waste ink tank is a common solution. You will see the counter drop to 0

A: This suggests that the waste ink pads are truly full, and the counter is incrementing rapidly because the pads cannot absorb more ink. You should clean or replace the pads and, ideally, install an external waste ink tank.

Click the button on the right side.

A warning prompt will appear asking for confirmation. Click . Step 5: Finalizing the Process

Epson printers like the L3111 track how much ink is used during cleaning cycles and normal printing. This excess ink is collected by porous sponges known as . When the software estimates these pads are nearly full (typically after 4,000 to 5,000 copies), it triggers a lock, signaled by flashing red lights on the control panel. Step-by-Step: How to Use the Resetter