Hx8872-c Datasheet =link= Review

The HX8872-C is designed for standard SMT assembly processes:

HX8872-C application note, HX8872-C vs ILI9341, HX8872-C pinout, HX8872-C Arduino library, HX8872-C replacement.

: Available in QFN and QFP compact packages for space-saving designs. Internal Architecture The device is organized into several functional blocks:

When evaluating the HX8872-C datasheet for schematic entry, pay close attention to these vital parameters: Specification Value 3.0V to 3.6V Analog Supply Voltage ( AVDDcap A sub cap V cap D cap D end-sub ) 6.5V to 13.5V Gate On Voltage ( VGHcap V sub cap G cap H end-sub ) 15V to 25V Gate Off Voltage ( VGLcap V sub cap G cap L end-sub ) -15V to -7V Maximum Pixel Clock (DCLK) Interface Options Parallel RGB (18/24-bit), TTL Operating Temperature -40°C to +95°C (Automotive grade compliant) 3. Pinout Configuration and Signal Descriptions hx8872-c datasheet

Ensure the ground plane under the chip (if using a exposed pad TQFP variation) contains stitching vias to dissipate heat efficiently during 50 MHz operations.

If you are repairing a device, the circuit diagram ⁠here might be helpful. WIN SOURCE HX8872-C Himax – Price, Stock & Datasheet - WIN SOURCE

Available in TQFP-64 (Thin Quad Flat Package) or COG (Chip on Glass) formats. The HX8872-C is designed for standard SMT assembly

In the world of display technology, the bridge between a processor and an LCD panel is often a critical, yet overlooked, component. The is one such component—a specialized LCD driver IC designed by Himax Technologies. While many drivers fade into obsolescence, the HX8872-C remains a relevant solution for specific embedded systems, legacy hardware repairs, and cost-sensitive TFT display modules.

Manages low-power modes and sequencing protocols to protect the liquid crystal material from DC voltage degradation. 2. Key Technical Specifications and Parameters

is a high-performance Timing Controller (T-CON) manufactured by Himax Technologies In the world of display technology, the bridge

The first page of any legitimate datasheet provides the "elevator pitch." For the HX8872-C, we would expect a clear (e.g., "Low-Dropout Voltage Regulator" or "Differential Line Driver"), a list of key features (operating voltage range, output current, protection circuits), and a typical application (e.g., "Portable Electronics" or "Automotive Sensor Interfaces"). The suffix "-C" likely indicates a specific variant—perhaps a temperature grade (Commercial, 0°C to 70°C), a package type (SOIC-8, QFN-16), or a revision level. Without this first page, the component is unusable.

Distributes the processed pixel color arrays to the physical row and column driver ICs bound to the edges of the open cell panel glass. Pinout and Package Information

| Parameter | Specification | |---|---| | Common Output Formats | Mini-LVDS, RSDS | | Number of Outputs | Varies by panel resolution | | Timing Control | Gate driver enable signals, polarity inversion signals |