Xmtk-9000 User Manual [top] Here

The XMTK-9000 comes with a against manufacturing defects. This does not cover damage from incorrect wiring, over-voltage, or physical abuse.

Position the top groove of the rear DIN clip onto the rail. Press downwards and snap the bottom spring-loaded clip into place. Ensure a minimum clearance of 50mm above and below the unit for optimal natural convection cooling.

Sensor input is not connected correctly, or the input type is wrong.

Use the arrow keys to input the authorization code (default factory code is usually 0000 or 0088 ). xmtk-9000 user manual

A: Contact technical support with your unit's serial number (found on the rear label). There is no hardware backdoor for security reasons.

Supports up to 2 groups of alarm outputs with 12 operating modes. Power Supply: Universal input 85-264VAC, 50/60Hz. Operating Temperature: 0-50°C, humidity ≤ 85% RH. 2. Installation and Wiring Guidelines

Navigate to . Select either DHCP for dynamic IP allocation or complete the Static IP fields (IP Address, Subnet Mask, Gateway, and Primary DNS) to conform to your local corporate network topology. Click Apply Changes to restart the network adapter. 5. Operation Modes and Calibration The XMTK-9000 comes with a against manufacturing defects

Always shut off the main power supply before wiring.

Options include Relay output (250VA capacity) or Voltage pulse output (0-12V) suitable for Solid State Relays (SSR). Essential Manual Functions

is a (commonly 48x48mm, 48x96mm, or 96x96mm depending on the specific sub-model) designed for PID or ON/OFF control. Key Features: Press downwards and snap the bottom spring-loaded clip

85–265V AC, 50/60 Hz; or 24V DC (model dependent). Power Consumption: ≤ 10VA. Operating Temperature: -10°C to 55°C (14°F to 131°F). Ambient Humidity: 10% to 90% RH (non-condensing). Enclosure Rating: Front panel IP65; Rear terminals IP20. Inputs and Outputs

Install in a dry location free from corrosive gases. Wiring: